H4 LED Headlight Bulbs | H4 LED Conversion Kit | X3 Series 6000 Lumen
Upgrade your vehicles headlights or fog lights with the powerful X3 series LED headlight bulbs. Get up to 3+ times the amount of light on the road compared to most standard halogen bulbs. Increase your confidence while driving in the darkest conditions. The X3 Series LED headlight bulbs are powered by the latest Philips Luxeon LumiLED technology, specifically designed for use in automotive forward lighting systems. These automotive LED bulbs have a total luminous flux of 3000+ Lumen per bulb. Brilliant cool white light from the Philips LED chips create an enhanced level of visibility and improved illumination where you need it most. Installation only takes minutes in most cars, trucks or motorcycles. The Philips LED is 6000K, included in the kit is a DIY glass tube and film to change to 3000K or 8000K. The simple plug-n-play LED bulb eliminates the need for any wiring harness, relay kit or ballasts. Just plug in and go! Instantly you’ll have up to 300% more light to deliver a much brighter and safer driving experience. The X3 LED headlight bulbs have an adjustable base that allows you to ‘tweak’ the bulb position to get an accurate beam pattern. This reduces unwanted glare or dazzle towards other drivers and optimizes the output for the driver. The powerful X3 LED headlight bulbs are super efficient using less than half the power of most halogen bulbs. Cool running, they are safe to handle even when they are on. The new X3 LED’s offer a great value for the performance, and a long rated rated lifespan. The X3 LED bulbs will even match or out-perform most HID / Xenon bulbs. These H4 LED headlight bulbs have low and high beam in one bulb and come ready to install. They can be used for retrofitting or converting nearly any headlight or fog light that uses a H4 , 9003, HB2 or P43T based halogen bulb.
- Remove old halogen bulb
- Plug Connector from Driver to Vehicle Harness
- To change colour, use included film and apply to glass tube. Then install gasket & tube onto bulb
- Loosen set screw with included Allen-key to allow bulb adjustment
- Install LED bulb into headlight
- Turn bulb until the light output is focused accurately
- Tighten set screw to insure bulb wont move during use
- Base is reversible if bulb doesn’t fit inside headlight housing
- H4 LED Headlight Bulbs / H4 LED Conversion Bulbs
- H4 Low Beam / H4 High Beam
- 9003 Low Beam / 9003 High Beam
- HB2 Low Beam / HB2 High Beam
- H4 Headlight / P43T Headlight
Still Have a question? Check our FAQ page for more information about LED and our products.